Parameterisable Communications IP
To support communications based ASIC designs we have built an enviable OFDM IP portfolio under the eSi-Comms brand, which is instrumental in providing a platform for custom and standards based designs. This communications IP is highly parameterised and suitable for many of the current air interface standards like Wi-Fi, Li-Fi, LTE, DAB. DRM and DVB.
eSi-Comms: Communications IP Technical Overview
- Parameterisable and configurable to serve a wide diversity of modern air interface standards.
- Simple streaming interfaces supporting dataflow.
- Register interface for configuration.
- Synchronization in time, frequency and phase through advanced DSP algorithms and control loops.
- Maximum likelihood equalization of single and multicarrier systems.
- Demodulation for BPSK up to 1024-QAM with soft decision bit-metric generation.
- Reed-Solomon and soft-decision Viterbi error correction decoding.
- Multiple antenna receiver processing.
- Standards include 802.11a/n (Wi-Fi), DVB-T(2), DVB-S(2), DVB-C(2), DAB, Li-Fi, DRM, UWB, LTE.
- Applications include wireless sensors, remote metering, cellular, wireless LAN and broadcast products.
- Advanced DSP algorithms for robust communication links.
- Integrated by our expert team.
- Backed up by the EnSilica reputation for quality design services.
The eSi-Comms IP is available through our Design Services to speed up your time to market and reduce risk. We can provide you with C, SystemC, CUDA or MATLAB libraries of the IP blocks for your evaluation and integration into your system design tool-chain. Once the final transceiver design is agreed EnSilica will parameterise and configure the IP, delivering your custom variation optimised for power and area. Optionally we can take ownership of the whole ASIC or FPGA development.
We provide a consultancy service for custom transceiver designs, where the synchronization, equalization and channel coding are simulated to find the effects of analog impairments, noise and channel effects, such as multipath and correlation. Our experts can advise on the right signal processing to deal with these impairments, and design the hardware to suit.
The trend for communications is ever more towards a flexible software defined radio (SDR) based modem. To support this approach many of the eSi-Comms IP blocks are designed to act as hardware accelerators to processor core such as an Arm core or DSP from Tensilica or Ceva. This provides a unique combination of flexibility together with dedicated hardware engines to off-load compute intensive processing.
Each standard has its own particular variation of the actual processing chain, however they share a common baseline. The diagram below shows the elements of a generic OFDM transmit chain. This identifies the typical processing modules that are found in many popular transmit chains such as IEEE802.11a (Wi-Fi), DVB, DAB, EnSilica has generic solutions for the baseband modules identified in blue, and for some specific standards like IEEE802.11a/n these are already pre-configured.
EnSilica provides a portfolio of generic OFDM receiver IP blocks. These allow many of the popular communications standards to be built. The IP catalogue is summarised in the diagram below which shows a typical OFDM receiver chain. The exact signal processing line-up may not be exactly as described in this diagram, it is just for illustration.
The entry level for a wireless communication system has high technical barriers. Increasingly the system needs to be designed around readily available IP components, utilising proven DSP algorithms for synchronization, equalization, demodulation and channel decoding. The rationale for using eSi-Comms IP is to speed up development time and reduce risk in final silicon.